We will beat any price
When you spend over £500
Complete Wetroom Walk In Shower System Inc Flooring System
A wetroom is a stylish addition to any modern bathroom. The concept is simple, select a floor system size and then select a glass panel appropriate for that flooring. After that all you do is tile over the wetroom floor and there you have a stylish, comtemporary enclosure.
As an example if you wanted to make a 1500 x 800mm enclosure (as seen in the main picture above) then purchase the 1600 x 1060mm floor which you then cut down to 1500mm long x 800mm wide and then select a piece of glass in a size of your choosing to sit on top of that floor.
The above piece of glass in the main image is the 900mm glass which would leave you a gap of 600mm to be able to walk in and out of the shower. You can have your piece of glass and entry as big or small as you like but we would always recommend you leave a gap of 500mm or more to allow easy access to your shower.
About the Wetroom Glass Panel
The wetroom panel is manufactured from clear 8mm safety glass and has a polished silver frame.
Regardless of width the glass on all wetroom panels is 2000mm high.
All the panels have 25mm adjustable profiles to allow for out of true walls. All panels come complete with a 1000mm polished chrome bracing bar which can be cut down to size as required.
The panels are available in various sizes please select as required.
About The Flooring
The flooring is available in various sizes each designed to allow the simple and cost effective creation of a stylish wetroom. We would advise that our wetroom systems are used in conjuction with our tanking kit to ensure a completely watertight finish.
The three main issues encountered when creating a wetroom are gradient, drainage and waterproofing (tanking kit needed) all these problems have been addressed simply and successfully with these wetroom systems.
The wetroom system is available in the below size options, please choose the nearest size to suit your installation (the size does not need to be exact).
System 1 - 1200 x 900mm
System 2 - 1400 x 933mm
System 3 - 1600 x 1067mm
System 4 - 1000 x 1000mm
Three steps to the perfect wetroom.
Gradient - The first step to any successful wetroom shower is to ensure that the water travels in the right direction. The wetroom system includes a floor former with a 17mm gradient on each side to ensure your water drains away consistently. The various sized floor former are all just 30mm in depth and will replace your existing floor section. The floor former is suitable for timber and concrete floors, simply choose the nearest size for your showering area.
Drainage - Now that you have ensured your water travels towards the drainage point, you need to ensure the water is removed safely. This is achieved by using the stainless stell waste gully that comes complete with your chosen system. The waste gully is height adjustable for varying tile depths and is complete with an attrative square waste plate.
Waterproofing - Finally you need to ensure that your room is completely watertight, we advise this is done using our tanking kit (optional extra - highly recommended). The tanking kit is applied onto a thin bed of flexible tile adhesive.
Our tanking kit comprises of:
5 x 1mtr waterproof matting
1 x external preformed corner
4 x internal preformed corners
12.5 mtr joint tape.
We believe our tanking kit to be the easiest and mose effective way of ensuring your system is fully watertight.
We will beat any price
We can deliver on the day of your choice
We can ship next day
It's free delivery over £499